Best Weigh Station Burbank Near Me

4worldlovers: California's "Commercial Vehicle Enforcement Facilities" are commonly called weigh stations or truck scales. These facilities are operated by the California Highway Patrol (CHP), not by Caltrans. However, Caltrans receives many inquiries about weigh stations. This page is designed to answer some of those questions. The links provide access to the on-line California Vehicle Code (CVC).

CVC Section 2813 outlines who must stop at weigh stations and inspection stations:

2813. Every driver of a commercial vehicle shall stop and submit the vehicle to an inspection of the size, weight, equipment, and smoke emissions of the vehicle at any location where members of the California Highway Patrol are conducting tests and inspections of commercial vehicles and when signs are displayed requiring the stop. Every driver who fails or refuses to stop and submit the vehicle to an inspection when signs are displayed requiring that stop is guilty of a misdemeanor.

260. (a) A "commercial vehicle" is a motor vehicle of a type required to be registered under this code used or maintained for the transportation of persons for hire, compensation, or profit or designed, used, or maintained primarily for the transportation of property.

(b) Passenger vehicles which are not used for the transportation of persons for hire, compensation, or profit and housecars are not commercial vehicles. ...

410. A "motor truck" or "motortruck" is a motor vehicle designed, used, or maintained primarily for the transportation of property.

471. A "pickup truck" is a motor truck with a manufacturer's gross vehicle weight rating of less than 11,500 pounds, an unladen weight of less than 8,001 pounds, and which is equipped with an open box-type bed not exceeding 9 feet in length. "Pickup truck" does not include a motor vehicle otherwise meeting the above definition, that is equipped with a bed-mounted storage compartment unit commonly called a "utility body."

PICKUP -- It depends on the gross vehicle weight rating (GVWR), unladen weight, and bed of the truck.

GVWR under 11,500 pounds, unladen weight of less than 8,001 pounds, and open box-type bed not exceeding 9 feet in length -- NO.

GVWR 11,500 pounds or more, unladen weight 8,001 pounds or more, or not equipped with an open box-type bed not exceeding 9 feet in length -- YES.

Discussion: According to CVC Section 471, pickups are a motor truck by definition, which is required to stop at the scales per CVC Section 2813. However, all California weigh stations have signs stating: "No Pickups." So, if a vehicle meet the definition of pickup in CVC Section 471, it is not required to stop at the scales because of the signs stating: "No Pickups." If the pickup has a GVWR of 11,500 pounds or more, an unladen weight 8,001 pounds, not equipped with an open-box type bed not exceeding 9 feet in length, or the pickup bed has been removed and a utility body or flat bed has been mounted, then it no longer meets the definition of pickup in CVC Section 471; it is then a "motor truck" under CVC Section 410 and required to stop at the weigh stations.

PICKUP WITH CAMPER SHELL -- NO (May have to stop under certain conditions. Contact California Highway Patrol Commercial Vehicle Section for verification (916-843-3400))

Discussion: It can also display passenger vehicle plates, as long as the cargo in the bed is not being hauled for compensation.

Discussion: The utility or box bed has to enter weigh stations.

Discussion: Rental trucks can be a U-Haul, Ryder, Sears, Budget, Enterprise, etc. A rental truck is a motor truck, according to CVC Section 410, and must stop at the weigh stations. Most scale facilities make this very clear with signs reminding drivers: "All Daily Rental/Moving Trucks Must Stop At Scales When Open." However, if the rental truck is a pick up, it does not necessarily have to stop (see "Pick Up " section above). If the rental truck is a flat bed or utitility bed, then YES, it does have to stop.

CARGO VAN -- It depends on the load and the use. Technically, they are a motor truck according to CVC Section 410 and, therefore, required to stop at the weigh stations.

Discussion: Yes, technically a cargo van is a motor truck according to CVC Section 410 and, therefore, required to stop at the scales.

For more information about who must stop at the scales, contact the California Highway Patrol (CHP) as follows:

4worldlovers:
SFS Public Scale is a division of Gabriel Container Co. We are a certified public weigh station serving the Los Angeles area conveniently located in Santa Fe Springs, off the 605 Freeway Slauson Blvd exit.

Our scale is located along the north side of the GCC building. Once your see the GCC sign, pull up past the black gates and you will see it on your right. No need to make an appointment, first come first serve.

4worldlovers: Los Angeles Public Scales : San Bernardino County : Orange : Ventura : Kern : Certified Weighmaster

A California public weighmaster's certificate of the vehicle's unladen or empty weight is required for trucks and pickups. A weight certificate is not required for:

Trucks or pickups previously registered in California, when the prior California registration shows the empty or unladen weight, and the vehicle has not been modified to change the weight.

Trucks or pickups with an empty or unladen weight of 6,000 pounds or less where the weight is indicated on an out-of-state certificate of title or registration, and the vehicle has not been modified to change the weight.

Two-axle or three-axle trucks weighing 10,001 pounds or more. The estimated weight is required.

A portion of your vehicle's registration fee on the light weight of your truck. This may be referred to as the tare weight of the truck. You must go to a scale that weighs the public for hire and ask for a certified weight. There may be a fee charged for this service.

What is the difference between a certified weight tag (weighmaster certificate) and an axle load weight tag?

A certified weight tag (weighmaster certificate) is used to buy or sell a bulk product when both the buyer and seller were not present to see the product weighed of measured. It is also used when a charge for service is based on the weight or measure of the product, such as household goods moving. An axle load weight tag used by truck drivers to determine if a vehicle and its load exceed the weight limits for it specified in the California Vehicle Code.